manualshive.com logo in svg

GE G30, Инструкция по эксплуатации

Инсталляторский руководство для продукта Salus G30 доступен для загрузки бесплатно на manualshive.com. Получите подробное описание и инструкции по установке для вашего удобства. Не упустите возможность загрузить руководство сейчас и насладиться простотой установки Salus G30.

Поделиться
Скачать
background image

4-4

G30 Generator Protection System

GE Multilin

4.2 EXTENDED ENERVISTA UR SETUP FEATURES

4 HUMAN INTERFACES

4

4.2EXTENDED ENERVISTA UR SETUP FEATURES

4.2.1 SETTINGS TEMPLATES

Setting file templates simplify the configuration and commissioning of multiple relays that protect similar assets. An exam-
ple of this is a substation that has 10 similar feeders protected by 10 UR-series F60 relays.

In these situations, typically 90% or greater of the settings are identical between all devices. The templates feature allows
engineers to configure and test these common settings, then lock them so that they are not available to users. For exam-
ple, these locked down settings can be hidden from view for field engineers, allowing them to quickly identify and concen-
trate on the specific settings.

The remaining settings (typically 10% or less) can be specified as editable and be made available to field engineers install-
ing the devices. These are settings such as protection element pickup values and CT and VT ratios.

The settings template mode allows the user to define which settings are visible in EnerVista UR Setup. Settings templates
can be applied to both settings files (settings file templates) and online devices (online settings templates). The functionality
is identical for both purposes.

Settings files conversion from previous firmware versions is supported.

a) ENABLING THE SETTINGS TEMPLATE

The settings file template feature is disabled by default. The following procedure describes how to enable the settings tem-
plate for UR-series settings files.

1.

Select a settings file from the offline window of the EnerVista UR Setup main screen.

2.

Right-click the selected device or settings file and select the 

Template Mode > Create Template

 option.

The settings file template is now enabled and the file tree displayed in light blue. The settings file is now in template editing
mode.

Alternatively, the settings template can also be applied to online settings. The following procedure describes this process.

1.

Select an installed device from the online window of the EnerVista UR Setup main screen.

2.

Right-click the selected device and select the 

Template Mode > Create Template

 option.

The software prompts for a template password. This password is required to use the template feature and must be at
least four characters in length.

3.

Enter and re-enter the new password, then click 

OK

 to continue.

The online settings template is now enabled. The device is now in template editing mode.

b) EDITING THE SETTINGS TEMPLATE

The settings template editing feature allows the user to specify which settings are available for viewing and modification in
EnerVista UR Setup. By default, all settings except the FlexLogic equation editor settings are locked.

1.

With the template already enabled, locate the device or settings file in the Online or Offline Window area in the soft-
ware.

2.

Right-click the device or file and select the 

Template Mode > Edit Template

 option to place the device in template

editing mode. If prompted, enter the template password then click 

OK

.

3.

Open the relevant settings window that contains settings to be specified as viewable.

Содержание G30



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для G30

2gig Technologies GC3 Manual preview
GC3
Бренд: 2gig Technologies Страницы: 4
2gig Technologies GC3 Quick Start Manual preview
GC3
Бренд: 2gig Technologies Страницы: 2
G1SLE MK2 Alignment Manual preview
MK2
Бренд: G1SLE Страницы: 2
Farfisa TD6100 Manual preview
TD6100
Бренд: Farfisa Страницы: 20
Racal Instruments 1266 Manual preview
1266
Бренд: Racal Instruments Страницы: 64
Gascat ARGOS Installation, Operation & Maintenance Manual preview
ARGOS
Бренд: Gascat Страницы: 32
hager coviva Smartbox TKP100A Quick Manual preview
coviva Smartbox TKP100A
Бренд: hager Страницы: 4
Vag ZETA Operating And Maintenance Instructions Manual preview
ZETA
Бренд: Vag Страницы: 12
National Instruments PXIe-4302 Calibration Procedure preview
PXIe-4302
Бренд: National Instruments Страницы: 14
National Instruments PXIe-4302 User Manual preview
PXIe-4302
Бренд: National Instruments Страницы: 31
National Instruments NI-9244 User Manual And Specifications preview
NI-9244
Бренд: National Instruments Страницы: 50
National Instruments NI 9870 Operating Instructions And Specifications preview
NI 9870
Бренд: National Instruments Страницы: 24
National Instruments NI 9247 Getting Started Manual preview
NI 9247
Бренд: National Instruments Страницы: 21
National Instruments NI 9242 Getting Started Manual preview
NI 9242
Бренд: National Instruments Страницы: 39
National Instruments NI 9218 Getting Started preview
NI 9218
Бренд: National Instruments Страницы: 22
National Instruments NI 9263 Calibration Procedure preview
NI 9263
Бренд: National Instruments Страницы: 8
National Instruments NI 9425 Getting Started Manual preview
NI 9425
Бренд: National Instruments Страницы: 20
National Instruments NI 9234 Getting Started preview
NI 9234
Бренд: National Instruments Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды