GE FVP110, Руководство по обслуживанию

Страница: 200 / 292

FVP 110 Fieldbus Valve Positioner Manual
184
GE Energy
Parameters of Resource Block
Table 60 Resource Block Parameters
Relative
Index
Index Parameter
Name
Default
(factory
setting)
Write Description
0 1000 Block Header Block Tag
=O/S Information about this block, including the
block tag, DD revision, execution time
1 1001 ST_REV 0 — Incremented when a change is made to the
parameter settings for the resource block to
indicate the revision level of the settings, and
used to see whether or not there is a change in
parameter settings.
2 1002 TAG_DESC Null Universal parameter storing the description of
the tag
3 1003 STRATEGY 1 Universal parameter used by an upper-level
system to classify the function blocks
4 1004 ALERT_KEY 1 Universal parameter used as a key to identify
the point from which an alert is issued;
normally used by an upper-level system to
select alerts to provide to a particular operator
who covers a specific area of the plant.
5 1005 MODE_BLK O/S Auto Universal parameter that indicates the block
operation conditions and is composed of actual
mode, target mode, permitted modes, and
normal mode.
6 1006 BLOCK_ERR — — Universal parameter indicating the hardware
and software error statuses related to the block
itself
7 1007 RS_STATE — — Indicates the statuses of resource in the
FVP110.
8 1008 TEST_RW Null Parameter used to test read and write access
to the FVP110
9 1009 DD_
RESOURCE Null — Name of the device description (DD) containing
the information of this resource block
10 1010 MANUFAC_
ID 0x00594543 — Manufacturer ID; 5850435 (= 0x594543) is
assigned to Yokogawa Electric Corporation.
11 1011 DEV_TYPE — — ID number of device; 1 or 7 (/EE) is assigned to
the FVP110.
12 1012 DEV_REV — — Revision number of the FVP110