GE EPM 5100, Инструкция по эксплуатации

Страница: 57 / 86

CHAPTER 4: PROGRAMMING
EPM 5100 ELECTRONIC POWER METER – USER GUIDE 4–9
4.4.3 Energy Format
Press ↵ to show the format for displaying energy values. The energy format is displayed as
follows:
The second line shows the active format and the cursor appears under the fifth position,
after the first four X's. Either the
V
and
U
key toggles that character among X, period (.), or
blank. If X is chosen by pressing ↵ , the cursor moves over one position and the same
choices may be made; if period is chosen, only X and blank are available at the next
position. Choosing a blank at any position jumps the cursor to the units multiplier, which
toggles between 'k' (kilo) or 'M' (mega). Press
↵ one more time to confirm your choice. The
available formatting choices are
XXXX
XXXX.X
XXXX.XX
XXXXX
XXXXX.X
XXXXXX
4.4.4 Demand Format
Press ↵ to show the format for displaying demand values:
The second line shows the active format and the cursor appears under the fourth position,
after the first three X's. Either the
V
and
U
key toggles that character among X, period (.),
or blank. If X is chosen by pressing ↵ , the cursor moves over one position and the same
# VA B # kVAh
# VA C # Hertz
# VA
# PF [Lag or Lead]
# kWh
# +kVarh
# -kVarh
# kVAh
# Hertz
Table 4–1: Parameters Available with Normal Scroll
2½ and 3 element Wye 2 element Delta
Energy Format:
XXXX_ ’k’
Demand Format:
XXX_ ’ ’
Courtesy of NationalSwitchgear.com