manualshive.com logo in svg

GE EPM 5100, Инструкция по эксплуатации

Поделиться
Скачать
GE EPM 5100 Скачать руководство пользователя страница 44

3–6

EPM 5100 ELECTRONIC POWER METER – USER GUIDE

CHAPTER 3: METERING

3.2.9

Power Factor

Power Factor

Power factor is calculated for each phase and for the total. With no input voltage or 
current, power factor values are displayed as 0.00. Values are identified on the LCD as “PF 
A”, “PF B”, “PF C”, and “PF”, with an appropriate indication for lagging (LAG) or leading (LEAD) 
current with respect to voltage.

Average Power Factor

Average power factor is given for the previous demand interval (DmdAvg) and also for the 
entire period since the last demand reset (Avg). The demand interval may be set as 
described under Current Demand above. Values are identified on the LCD as “PF DmdAvg” 
and “PF Avg”.

Power Factor and Watts at Maximum Voltamperes

The power factor and real power demand that occurred at the same time as the maximum 
recorded voltampere demand value since the last demand reset are displayed. Values are 
identified on the LCD as “PF@VAPk” and “W@VAPk”.

3.2.10 Miscellaneous Functions

The number of times the demand values were reset since the last meter initialization is 
identified on the LCD as “Dmd Reset”. The time left in the present demand subinterval is 
identified as “Dsub time”. The number of power outages encountered since the last meter 
initialization is identified as “Power Out”.

3.2.11 Transformer Ratios

The potential transformer (PT) and current transformer (CT) ratios are identified on the LCD 
as “PTR” and “CTR”, respectively.

Courtesy of NationalSwitchgear.com

Содержание EPM 5100























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды