GE Druck DPI 832, Руководство пользователя

Страница: 12 / 131

[EN] English -
5 K393 Issue 3
Table 5: Menu options - Settings (Output) Table 6: Additional data for Settings (Output):
Options Description
To select and set up a value for the “Nudge”
output. Example: 1.000mA increments.
Additional data: Select Settings ( ■ ■ )
To select and set up values for the “Span Check”
output. Example output cycle:
This cycle repeats
automatically.
Additional data ( Table 6 ): Select Settings ( ■ ■ )
% Step
To select and set up values for the “% Step” output.
Example output cycle:
Auto Repeat - Optional
Additional data ( Table 6 ): Select Settings (
■ ■
)
... Step
To select and set up values for the “Defined Step”
output. Example output cycle:
Auto Repeat - Optional
Additional data ( Table 6 ): Select Settings (
■ ■
)
To select and set up values for the “Ramp” output.
Example output cycle:
Auto Repeat - Optional
Additional data ( Table 6 ): Select Settings ( ■ ■ )
Item Value
Span Check
Low (0%) Set the 0% value.
High (100%) Set the 100% value.
Dwell (d) Set the period (Hours:Minutes:Seconds) between
each change in value.
% Step Low (0%), High (100%), Dwell (d): As above.
Step Size (s) ...
% Set the change in value for each step as a
percentage of the full-scale range (High - Low).
Defined Step Low (0%), High (100%), Dwell (d): As above.
Step Size (s) Set the change in value for each step in mA, mV or
Volts.
Ramp Low (0%), High (100%), Dwell (d): As above.
Travel (t) Set the period (Hours:Minutes:Seconds) to go from
the Low (0%) value to the High (100%) value.
Auto Repeat If applicable, select this item to repeat a cycle
continuously.