GE Druck ADTS 405, Руководство по обслуживанию

Страница: 5 / 64

Druck ADTS 405 Service Manual
K171 Issue No. 1 Page iii
GLOSSARY
Terminology
The terminology used in this manual is specific and individual interpretation must not be
introduced. The terms are defined as follows:
Adjust:
To bring to a more satisfactory state; to manipulate controls, levers, linkages, etc. to return
equipment from an out-of-tolerance condition to an in-tolerance condition.
Align:
To bring into line; to line up; to bring into precise adjustment, correct relative position or
coincidence.
Assemble:
To fit and secure together the several parts of; to make or form by combining parts.
Calibrate:
To determine accuracy, deviation or variation by special measurement or by comparison with a
standard.
Check:
Make a comparison of a measure of time, pressure, temperature, resistance, dimension or other
quality with a known figure for that measurement.
Disconnect:
To detach the connection between; to separate keyed or matched equipment parts.
Dismantle:
To take apart to the level of the next smaller unit or down to all removable parts.
Ensure:
To confirm that a proper condition exists; to find out with certainty.
Examine:
To perform a critical visual observation or check for specific conditions; to test the condition of.
Fit:
Correctly attach one item to another.
Inspect:
Review the work carried out by Specialists to ensure it has been performed satisfactorily.
Install:
To perform operations necessary to properly fit an equipment unit into the next larger assembly
or system.
Maintain:
To hold or keep in any particular state or condition especially in a state of efficiency or validity.
Operate:
Ensure that an item or system functions correctly as far as possible without the use of test
equipment or reference to measurement.
Readjust:
To adjust again; to move back to a specified condition; to bring back to an in-tolerance condition.
Reconnect:
To rejoin or refasten that which has been separated.
Refit:
Fit an item which has previously been removed.