GE Druck ADTS 405 F Mk2, Инструкция по эксплуатации

Страница: 115 / 140

CONFIGURATION
© 2017 General Electric Company – All Rights Reserved. ADTS 405 R/F Mk2 Instruction Manual-English | 97
7.4.25 CONFIG, [MORE], [SETUP MODE]
This function enables, disables or limits access to the secondary functions. There are three
setup modes:
7.4.26 CONFIG, SPEED, [AUTO ZERO]
CONFIG equivalent of SETUP function.
7.4.27 CONFIG, SPEED, [CAS/TAS]
CONFIG equivalent of SETUP function.
7.4.28 CONFIG, SPEED, [Pt TEMPERATURE]
CONFIG equivalent of SETUP function.
7.4.29 CONFIG, RATE TIMER
CONFIG equivalent of SETUP function.
7.4.30 CONFIG, RATE
CONFIG equivalent of SETUP function.
7.4.31 CONFIG, LEAK MEASURE, [AUTO LEAK ON/OFF]
CONFIG equivalent of SETUP function, see Section 7.2.10, “LEAK MEASURE/CONTROL,” on
page 76 for details.
7.4.32 CONFIG, LEAK MEASURE, [AUTO LEAK LOCK]
Prevents changes to AUTO LEAK setting in SETUP.
7.4.33 CONFIG, LEAK MEASURE, [AUTO LIMIT ON/OFF]
CONFIG equivalent of SETUP function, see Section 7.2.10, “LEAK MEASURE/CONTROL,” on
page 76 for details.
7.4.34 CONFIG, LEAK MEASURE, [AUTO LIMIT LOCK]
Prevents changes to AUTO LIMIT setting in SETUP.
Table 7-7: Setup Modes
Mode Description
FULL This mode provides complete access to all secondary functions when the
SETUP key is pressed. All pressure and aeronautical units can be selected.
MINIMUM This mode provides limited access to the secondary functions when the
SETUP key is pressed. This prevents access to error recovery, rate timers etc.
Units can only be changed between two preselected types. See Section 7.3 for
full details.
OFF This mode prevents access to all secondary functions.