GE DINAMAP ProCare 100, Руководство по обслуживанию

Страница: 12 / 96

1-3 ProCare Patient Monitor Service Manual Revision A
2009381-001
1.1 Scope of Manual
This Service Manual provides service and parts repair information about the
DINAMAP
ProCare Monitor. This manual is intended for use by trained
service technicians who are familiar with electromechanical devices and
analog circuit techniques.
Only qualified technicians should perform repairs to this equipment.
For information about operating the Monitor in a clinical environment, refer to
the separate Operations Manual.
This Service Manual consists of the following five sections:
Section 1 describes this volume and tells you how to use it. Information is
also provided about the physical and functional characteristics of the
Monitor, and how to get assistance in the event the unit fails to function
properly.
Section 2 provides a general overview of the ProCare Monitor including the
user controls, external connections and product/parameter specification.
Section 3 presents principles of operation for the Monitor, including an
overall system description and principles of operation at the component
level.
Section 4 provides information about periodic and corrective maintenance of
the Monitor and part list, replacement part lists. Procedures include module
performance testing, and calibration procedures. Information is also
provided to facilitate isolating faults to the subassembly level.
Section 5 provides component information about the Monitor, including
assembly drawings and electrical schematics.
WARNING
To reduce the risk of electric shock, do not
remove cover or back of any component.
Refer servicing to qualified service personnel.