GE DigitalFlow GF868, Руководство для стартапов

Страница: 46 / 80

Chapter 3. Operation
36 DigitalFlow™ GF868 Startup Guide (1 and 2-Channel)
3.3 Using the Display (cont.)
At various times, one or more of the following four symbols may be displayed on the far right of the locator bar:
• 
: This symbol, which is called the pointer , indicates that additional option bar entries are available. These
options can be accessed by using the [

and [

keys.
•
*: A flashing asterisk indicates that the Model GF868 is currently logging information. See the Programming
Manual for instructions on creating a log file.
•
S or S
L
: This symbol indicates the status of the red [SHIFT] key. “S” indicates that the [SHIFT] key is activated for the
next keystroke only, while “S
L
” indicates that the [SHIFT] key is locked. See the next section for instructions on
using the keypad.
•
T: This symbol indicates that the Model GF868 is currently totalizing data.
The middle portion of the screen pane is the prompt area . This area displays data, graphs, and logs in measurement
mode and menu prompts in programming mode. In addition, error code messages, which are described in the Service
Manual , are displayed in the prompt area.
The lower portion of the screen pane is called the option bar . The option bar displays the functions assigned to the four
keys immediately below the display screen (
[F1]-[F4]
for the left pane and
[F5]-[F8]
for the right pane). Press a function
key to select the function listed in the option bar immediately above it. If more than four functions are available, a
pointer (

) appears on the far right of the locator bar. Press the [

or [

keys to display the additional functions on
the option bar.
For information about other symbols and text that may appear on the display screen, refer to the Service Manual .