GE CARESCAPE, Руководство пользователя

Страница: 123 / 548

Starting and ending monitoring
End of standby
The monitor ends the standby automatically when any of the following conditions
occur:
●
Vitals signs are still present after Prepare for Standby has been selected and the
audio pause time expires.
●
Any vital signs are detected as active.
●
User input is received: a keyboard key is pressed, Trim Knob is pressed or rotated,
primary mouse button is pressed, touchscreen is pressed.
●
A PDM or TRAM is connected.
About continuing monitoring
Patient information and data is stored in the PDM and TRAM. The Connecting
Measurement message appears on the monitor when the PDM or TRAM is first
connected. Vital sign monitoring is not available during this initialization time. At
the conclusion of the initialization, the stored patient information and data can be
transferred to the monitor from the acquisition module. While patient information and
data is being transferred, the
Loading from PDM or Loading from Tram message
appears on the monitor. The type of patient information and data that can be
transferred includes the following:
●
Patient demographic data
●
Patient trends and alarm histories; alarm histories are converted to snapshots
during the transfer
●
All zeroed invasive pressure site labels
●
All invasive pressure transducer zero values for channels 1 to 4
●
Latest values and timestamps for C.O., PCWP, and NIBP measurements
●
NIBP cuff size
●
NIBP auto cycle on/off information
●
NIBP cycle time information if the NIBP auto cycle is on
The actions taken by the monitor and the menus that appear depend on whether the
monitor has an active patient case/admitted patient or not.
How to continue monitoring when a case is not
active/patient is discharged
When you connect a PDM or TRAM that is actively measuring vital signs from ECG,
invasive pressures or SpO
2
, the patient information and data is automatically loaded
from the PDM or TRAM to the monitor and a case is automatically started/patient is
admitted.
When you connect a PDM or TRAM that is not actively measuring vital signs from
ECG, invasive pressure or SpO
2
but contains patient information, the Continue menu
appears. The Continue menu has two informative fields on the top: the Patient in the
monitor and the Patient in the PDM or Patient in the Tram . These fields show the text
No patient identification data available if there is no active case/admitted patient.
Select one of the following to continue monitoring:
●
Load PDM Data / Load Tram Data : This selection loads patient information and
data from the module.
2062971-001 CARESCAPE Modular Monitors 123