GE CARESCAPE, Руководство пользователя

Страница: 110 / 548

Setting up the monitor before use
width, full height), small (half width, half height), tall (half width, full height), and wide
(full width, half height):
SMALL WIDE
BIG TALL
You can configure parameters to the lower parameter area (horizontal, lower part of
the screen) and/or to the upper parameter area (vertical, on the right).
Upper parameter area
You can configure individual waveforms and parameter windows in the Upper
Parameter Area . One parameter window can show more than one parameter when
parameter combinations (such as SpO2 & SvO2 ) are used.
You can also combine invasive pressure waveforms. ECG or ST monitoring reduces the
number of upper parameter windows by one, and monitoring both of them reduces
the number by two.
Lower parameter area
Any numeric parameter window in the lower parameter area having an empty field
(=OFF) above or below it is automatically enlarged.
You can configure a maximum of eight lower parameter windows. When the lower
parameter windows are on, they reduce the space used for waveforms and upper
parameter windows: you can then choose up to six waveforms and 12 parameter
windows to display in the upper parameter area of the screen.
Selecting parameters to the screen
Most parameters appear on screen automatically when their measurement starts.
However, if you cannot see the parameter you are measuring, select it to the screen:
1. Select Monitor Setup > Screen Setup .
2. B850 and B450 with the Double Video license: Select Screen 1 or Screen 2 tab.
3. Select the parameter to the upper or lower parameter area:
a. Select Upper Parameter Area > Show Parameter .
If a parameter is still not visible in the upper parameter area after you have
selected it to the screen, raise its priority with the arrow keys in the
Change
Order column. If you want to hide the waveform of a parameter, deselect
Show with Waveform .
b. Select Lower Parameter Area and activate it by selecting the radio button
Double Height or Single Height . Then select the parameter from the
dropdown lists. To hide the Lower Parameter Area from the screen, select Off .
Selecting Double Height allows eight different parameter combinations in the
selection lists in addition to the individual parameters, and selecting Single
Height allows four combinations.
Waveform field safety precautions
WARNING
Always make sure that the waveform size is sufficient for the
care environment.
110 CARESCAPE Modular Monitors 2062971-001