GE CARESCAPE Monitor B850, Руководство по обслуживанию

Страница: 82 / 192

CARESCAPE Monitor B850
74
2106778-001
7.5.2 Deleting a printer
NOTE: Before deleting a laser printer, check Monitor Setup > Printing > Devices > Status. If a
printout is assigned to the printer to be deleted, redirect the printout to another valid printer.
1.
Log in to Webmin.
2. Select Configuration > Printers .
3. In the Sub-Modules for Printers menu, select Delete Printer .
4. In the Delete Printer window, select the printer to delete.
5. Select Save .
The change will take effect immediately.
7.5.3 Printing a test page
1. Log in to Webmin.
2. Select Configuration > Printers .
3. In the Sub-Modules for Printers menu, select Print Test Page .
4. In the Print Test Page window, select the printer.
5. Select Save .
7.6 Configuring Citrix
Configure the Citrix connection for iPanel software.
NOTE: GE is not responsible for installing or configuring the Citrix server.
NOTE: Contact hospital's IT Administrator or biomedical department to obtain values to the
following fields.
NOTE: Server address, initial program and Citrix session timeout are mandatory fields.
1.
Log in to Webmin.
2. Select Configuration > Citrix .
3. In the Citrix Configuration window, enter the applicable information in the following
fields:
Field name Description and valid choices
Server Version
Select the supported server version: 4.0, 4.5,
5.0, 6.0, 6.5.
Server 1 to Server 4 Addresses
Blank, server IP address or server hostname,
up to 255 character long.
Initial Program
Initial Citrix- published application that will be
launched, for example #MUSE. This field is
mandatory, if the server address has been
entered. The maximum length is 128
characters.
Citrix Session Timeout (in Minutes)
Valid values are between 0-99. Keeping the
session alive allows users to quickly return to
their last session, but locks a Citrix license.
Selecting "0" disables the timeout feature.