GE Cafe series, Руководство по установке

Страница: 1 / 26

21
TOOLS YOU MAY NEED
Installation Refrigerator
Instructions
GE Café ™ models
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING Tip Over Hazard.
Built-in style models (model PYE, CYE, and PWE) are
top heavy, especially with any doors open. These
models must be secured with the anti-tip floor
bracket to prevent tipping forward, which could
result in death or serious injury. Read and follow
the entire installation instructions for installing the
anti-tip floor bracket packed with your refrigerator.
‡
IMPORTANT
³
Observe all governing codes
and ordinances. Save these instructions for local
inspector’s use.
‡
Note to Installer – Be sure to leave these instructions with
the Consumer.
‡ 1RWHWR&RQVXPHU²
Keep these instructions for future
reference.
‡ 6NLOOOHYHO²
Installation of this appliance requires basic
mechanical skills.
‡ &RPSOHWLRQWLPH²
Refrigerator Installation can vary
Water Line Installation 30 minutes
‡ 3URSHULQVWDOODWLRQLVWKHUHVSRQVLELOLW\RIWKHLQVWDOOHU
‡ 3URGXFWIDLOXUHGXHWRLPSURSHULQVWDOODWLRQLVQRWFRYHUHG
under the Warranty.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorway, the
refrigerator door and freezer drawer can be removed.
‡ 7RUHPRYHWKHUHIULJHUDWRUGRRUVHHWKH,QVWDOOLQJWKH
Refrigerator section.
‡ 7RUHPRYHWKHIUHH]HUGUDZHUVHHWKH5HPRYLQJWKH
Freezer Drawer section.
WATER SUPPLY TO THE ICE MAKER AND DISPENSER
If the refrigerator has an ice maker, it will have to be
connected to a cold water line. A GE water supply
kit (containing tubing, shutoff valve, fittings and
instructions) is available at extra cost from your dealer,
by visiting our website at GEAppliances.com (in Canada
at www.GEAppliances.ca ) or from Parts and Accessories,
800.626.2002 (in Canada 1.800.661.1616).
Adjustable Wrench
1/4” Outer Diameter
Compression Nut
and Ferrule (sleeve)
Phillips-Head Screwdriver
Ȓµ
Socket Ratchet/Driver
1/8”, 3/32”, 1/4” & 5/32”
Allen Wrenches
Pencil
1/8” Drill Bit and
Electric or Hand Drill
Tape Measure
1/4” Nut Driver
Pliers
Level
Flat-Head Screwdriver
Torx T20, T25