manualshive.com logo in svg

GE AV-300i, Руководство пользователя, Страница: 18 / 296

Поделиться
Скачать
GE AV-300i Скачать руководство пользователя страница 18

GEH-6641E

——————   Function Description  ——————

18

Ch.1

1.1.1  Variable Connection Methods

The source allows you to assign the signal for the  input Block.

Thanks to a predefined list,  pick-list, the user can select the signal origin by connecting it to the input Block.

The signal selected will be assigned to the source. This signal controls the Block Function and is therefore defined
as a control signal. The signals come from different points of the control system.

The connection points can derive from:

1 - Physical terminal board

analog and digital signals from the drive terminal strip and from the
EXP expansion cards.

2 - Analog and digital signals

from DGFC option cards, Field Bus, keypad.

3 - Drive internal variables using

keypad or toolbox.

The control signal is always connected on the Source of each Block. The state of this signal depends on the
Block Function.

For example:

- the Ramp Setpoint Block which generates the ramp reference, defaults Ramp ref 1 src
source from the Analog input 1 output signal  (the Block output on the analog Input 1). This
signal is in the pick-list of the Ramp ref 1 src, and can be changed. For example Int ramp ref
1 (Ramp setpoint block internal value).

- the analog Input Block, connects on its Ai 1 sgn src Source (which inverts the output
reference signal) the NULL signal. If the user wants to enable the specific function, he has
to make a selection inside the pick-list of the Ai 1 sgn src (for example ONE, Digital Input
1, etc.).

Ramp ref 1 src

Ramp setpoint

Ramp ref inv src

+1

-1

* -1

* +1

AI 1 alt value

An inp 1 output

Analog input 1 Block

Ramp Setpoint Block

Al 1 sgn src

Al 1 alt sel src

NULL

NULL

NULL

Terminal input

N

OTE

!

AI 1 alt sel src source allows you to select the signal to enable an alternative output reference.

AI 1 alt value parameter determines the value of the alternative output reference.

Ramp ref inv src allows you to select the signal for inverting the final output setpoint.

Содержание AV-300i









































































































































































































































































































Отзывы:

Нет отзывов