GE ArcamEBM Spectra H, Руководство по эксплуатации

Страница: 139 / 142

7
Software
Overview
7 7..1 1..3 3..1 14 4 S Se errvviicce e & & M Ma aiin ntte en na an ncce e
The operator performed tasks, found under 11 PM-U Machine
Checklist
and 10
PM-U Electron Beam Unit Checklist
, are manda-
tory to keep the system in good condition. See also 12.3 PM-U Ma-
chine
and 12.2
PM-U Electron Beam Unit
for related instructions.
If the maintenance period is exceeded, a warning will be activated
to notify the operator that it’s time for maintenance. The warning will
be displayed, every time the pressure in the machine rises to nor-
mal air pressure, until the maintenance is completed and the opera-
tor resets the timer with the reset button.
On the M Ma aiin ntte en na an ncce e and S Se errvviicce e E En ng giin ne ee err tab the following is found:
Maintenance timers
Test function for the controlled vacuum
Focus reset
Access to Hardware status page (HW Status)
Set the log file location (Log Folder)
02 OM-710430 en-GB 135