GE ArcamEBM Spectra H, Руководство по эксплуатации

Страница: 137 / 142

7
Software
Overview
7 7..1 1..3 3..1 12 2 C Ca alliib brra attiio on n
The tools for calibration are gathered on the calibration page.
B Bu uiilld d E En nvve ello op pe e
Select and edit the build envelope
S Se elle ecctt C Ca alliib brra attiio on n P Plla atte e A Arrttiicclle e
A Au utto o B Be ea am m C Ca alliib brra attiio on n
Used for Automatic Beam Calibration. This function requires a xQam beam
calibration plate.
R Ra akke e C Ca alliib brra attiio on n
Used for calibration of the different rake positions. Please refer to the Instal-
lation Manual and Maintenance Instructions for detailed information on how
to perform a rake calibration.
T Ta ab blle e C Ca alliib brra attiio on n
Used for calibration of the two positions of the build table (top and bottom
position).
A Alla arrm m L La am mp p T Te esstt
The alarm tower on top of the control cabinet indicates the current status of
the system with both light and sound.
Test that both sound and lights are working.
02 OM-710430 en-GB 133