GE AquaTrans AT868, Руководство пользователя, Страница: 56 / 158

Programming Site Data 2-31
September 2004
Setting Up a Frequency
Output
1.
At
Output B
or
D
, select
OFF
or
FREQ
and press
[ENTER]
.
2.
Do one of the following:
•
If you selected
OFF
, the meter returns to the
Global I/O
window.
Go to Procedure Options on page 2-32.
•
If you are using a 1-channel meter, go to Step 4.
•
If you are using a 2-channel/path meter, go to Step 3.
3.
At
Channel
, press [
X
] to select the desired channel/path and press
[ENTER]
.
4.
Press [
X
] to select the desired measurement parameter and press
[ENTER]
.
Note:
The measurement units that appear in these prompts are those
selected in the
GLOBL-SYSTM
menu earlier in this section.
5.
At
BASE
, enter a value for the low end of the output range
(-2,000,000 to 2,000,000) by using the arrow keys. Press [
W
]
and
[
X
] to move the cursor to desired location and press
[
S
]
and
[
T
]
to increase or decrease the number and press
[ENTER]
.
6.
At
FULL
, enter a value for the high end of the output range
(-2,000,000 to 2,000,000) by using the arrow keys. Press [
W
]
and
[
X
] to move the cursor to desired location and press
[
S
]
and
[
T
]
to increase or decrease the number.
7.
At
FULL SCALE FREQU
, enter a value for the full scale of the
output (between 10 to 100,000) by using the arrow keys. Press
[
W
]
and [
X
] to move the cursor to desired location and press
[
S
]
and
[
T
]
to increase or decrease the number.
8.
At Error handling, press [
X
] to select the desired option for
handling errors (
HOLD, LOW, HIGH
, or
OTHER
) and press
[ENTER]
.
9.
If
OTHER
is selected, the
Error frequency
display appears. This
allows the user to impose a set value for this option. Enter the
desired error frequency by using the arrow keys. Press [
W
]
and
[
X
] to move the cursor to desired location and press
[
S
]
and
[
T
]
to increase or decrease the number and press
[ENTER]
.
10.
Go to Procedure Options on page 2-32.