Your Air Conditioner
OPEN
CLOSE
●
Ventilation Control
When this control is set at CLOSE,
only the air inside the room can be
circulated and conditioned. When
it’s in the OPEN position, some
indoor air can be exhausted from
the room.
SELECTOR
FAN
HIGH
-
‘HIGH
HEAT
COOL
Selector
OFF turns air conditioner off.
FAN ONLY permits medium fan
speed operation without
or
heating.
For
the
Energy Saver
must be in the
NORMAL position.
LOW COOL permits cooling with
low fan speed operation.
MED COOL permits cooling with
medium fan speed operation.
HIGH COOL permits cooling
with high fan speed operation.
LOW HEAT permits heating with
low fan speed operation.
MED HEAT permits heating with
medium fan speed operation.
HIGH HEAT permits heating with
high fan speed operation.
THERMOSTAT
Thermostat Control
When you turn this control to
the desired setting, the thermostat
will automatically control the
temperature of the indoor air.
The higher the number selected,
the cooler the indoor air will be.
Saver
The Energy Saver Switch controls
For FAN ONLY operation, the
the fan operation. When it’s in the
Energy Saver Switch must be in the
NORMAL position, the fan will
position.
circulate room air continuously.
When it’s in the SAVE position, the
fan will automatically cycle on and
ENERGY SAVER
off with the compressor.
4