Your
Conditioner
SELECTOR
HIGH FAN
o
Selector
OFF turns air conditioner off.
FAN
low fan speed
operation without cooling.
FAN permits high fan
speed operation without cooling.
THERMOSTAT
Thermostat Control
When you turn the Thermostat
Control to the desired setting, the
OPEN VENT CLOSE
(ON
THE LOWER RIGHT SIDE
OF THE DISCHARGE GRILLE)
Ventilation Control
The vent door in your air
conditioner is closed when the
thermostat will automatically-control
slide switch is to the right. When
the temperature of the indoor air.
The higher the number selected,
the cooler the indoor air will be.
*For
Saver
be in
Saver
LOW COOL
with
low fan speed
-
HIGH COOL permits cooling
with high fan speed operation.
ENERGY SAVER
NORMAL
B
SAVE
The Energy Saver Switch controls
the fan
When it’s in
the NO&AL position, the fan will
circulate room air continuously.
When it’s in the SAVE position, the
fan will automatically cycle on and
off with the compressor.
Room air temperature may fluctuate
more widely when the Energy
Saver Switch is in the SAVE
position.
the vent is closed, only the air
inside the room can be circulated
and conditioned. Sliding the switch
to the left opens the vent door,
allowing a small amount of indoor
air to be exhausted from the room.
Setting the Ventilation Control at
OPEN is helpful in removing
air, smoke or odors from the room,
and permits outdoor air to enter
through normal openings in the
house. However, cooling
effectiveness is reduced when this
control is set at OPEN, so we
you don’t keep it there
especially in hot, humid weather.
4
..—. ——.. -.—. .
—