GE AKTApure, Руководство пользователя, Страница: 488 / 522

9.10 Available Run data
The table below lists all available Run data for ÄKTA pure.
Description Range/Unit Run Data
Status of connection and run. N/A System state
Total accumulated volume in the current
method or manual run. ml Acc. Volume
Accumulated volume in the current block
(method run only). ml Block volume
Total accumulated time in the current method
or manual run. min Acc. Time
Accumulated time in the current block
(method run only). min Block time
The current scouting number in the scouting
scheme. N/A Scouting no
The set flow rate of the system pumps. 0.001 – 50.000 ml/min
(ÄKTA pure 25) System flow
0.01 – 300.00 ml/min (ÄKTA
pure 150)
The set flow velocity of the system pumps.
Only available if a column is selected. cm/h System linear flow
The set flow rate of the sample pump. 0.001 – 50.000 ml/min
(ÄKTA pure 25) Sample flow
0.01 – 300.00 ml/min (ÄKTA
pure 150)
The set flow velocity of the sample pump.
Only available if a column is selected. cm/h Sample linear flow
The set position of the inlet valve A. A1 - A7 Inlet A
The set position of the inlet valve B. B1 - B7 Inlet B
The set position of the sample inlet valve. S1 - S7, buff Inlet S
The set concentration B or the current value
during a gradient. 0.0 – 100.0 %B Conc B
The set position of the Mixer valve. N/A Mixer valve
The set position of the Injection valve. N/A Injection
The set position of the Loop valve. N/A Loop position
488 ÄKTA pure User Manual 29119969 AB
9 Reference information
9.10 Available Run data