10.1.1
Introduction to the Method Editor
Description
The Method Editor is used to build new methods in a step-by-step manner using blocks
and instructions as building elements. The editor can also be used to edit already existing
methods.
Blocks
About blocks
Blocks are used to organize instructions into functional units. A block may, for instance,
contain instructions for loading a sample, or for equilibrating a column. Blocks can be
nested (i.e., a block can contain other blocks).
Blocks are useful for organizing instructions and structuring methods, and also allow
for reuse of existing sets of instructions. Individual blocks can be moved and used in any
method (within the same strategy) as required.
Creating a block
The general procedure to create a block in the Method Editor is to:
1
Click New on the Block menu.
2
In the dialog box shown, give the block a name and select a base (Time, Volume, or
Column volumes) for the block. The choice of base depends on the function of the
block.
•
Use Time as base for valve and pump maneuvering
•
Use Volume for sample application or fractionation.
•
Use Column volumes for blocks used for equilibration and washing.
ÄKTA ready Operating Instructions 28960345 AD
143
10 Creating a method
10.1 The Method Editor
10.1.1 Introduction to the Method Editor
