27
1. Panel status
Use this function to list all zones that are in alarm, tamper alarm, inhibited or active and any system alarms.
There are menu options available that display each of these conditions separately. However, this option can be
used to check on all zones that need attention. The letter preceding the zone number shows the status:
Code Zone
status
Meaning
A
Alarm
An alarm has occurred at this zone and must be acknowledged and reset. See the section
Alarm
on page
T
Tamper alarm
An alarm has occurred at this zone due to tamper or accidental damage. The alarm must be
acknowledged and reset. See the section
Alarm
on page
i
Inhibited
The zone has been excluded from functioning as part of the security system. It is probably
broken or faulty.
a
Active
The zone is activated and needs to be checked and fixed if necessary to ensure security is
maintained. For example, close the door.
To list all the state of all zones: Access menu option 1.
What happens next depends on the status of the zones:
No zones in alarm, tamper, inhibited or active
Zones in alarm, tamper alarm, inhibited or active
No Alarms, Tampers, Inhibits, Active
Press ENTER
Zones are listed either one at a time, or as a list of numbers:
Summary On A2. Front Door Contact
NEXT or ENTER
or
Summary On A1, A3, T4, i5, i9.
Input No:
From the display you can now:
Option Action
Result
Display the complete zone name
Enter the zone number and
press
[ENTER]
Display the complete zone name
(Excludes the status
No alarms, tampers, inhibit,
active
).
Update the list
Press
[NEXT]
Update the list of zone status.
Exit
Press
[ENTER]
Exit the menu option and return to the display
"
Code:
"
See also:
Menu option 2, Zones active on page
; Menu option 3, Zones in alarm on page
; Menu option 4, Zones inhibited
on page
30
.
