GE Advent, Руководство по установке

Страница: 37 / 116

35
Advent Commercial Fire System
Zone Settings
Use zone settings to add, delete, test, and modify zones.
Note
It is recommended that no more than 132 wireless sensors
be used in any individual Advent system.
If 2 or more Advent systems are in close proximity to each
other, the total number of wireless sensors for
all systems
must not exceed 132.
Enable Remote Phone Ring-Pause-Ring
17088
(Phone Access)
(Default = on) This setting allows you to program the panel to
answer remote phone ring-pause-rings. When on, a user can call
the panel once, hang up, and call again. The panel will then
answer the phone. Use this setting if an answering machine shares
a phone line with the panel.
Note
The user must not exceed the number of rings in the Can-
cel Ring-Pause-Ring after XX Rings setting (17053) when
calling the panel. Additionally, the user must call the panel
again between the times programmed in settings 17025
and 17026.
For residential use only.
To turn Enable Remote Phone Ring-Pause-Ring
On/Off:
Once the item number has been entered, enter
1
to turn this
setting on, or
0
to turn it off. Press
ƒ
to apply the new setting.
Min Time Between Ring-Pause-Ring Calls
17025
(Phone Access)
(Default = 10 seconds) Specify the minimum time (in seconds)
between ring-pause-ring calls. This is the minimum amount of
time that must elapse before the second call in a ring-pause-ring
attempt.
Setting the Min Time Between Ring-Pause-Ring
Calls:
Once the item number has been entered, specify the minimum
time (6–20). Press
ƒ
to apply the new setting.
Max Time Between Ring-Pause-Ring Calls
17026
(Phone Access)
(Default = 30 seconds) Specify the maximum time (in seconds)
between ring-pause-ring calls. This is the maximum amount of
time that may elapse before the second call in a ring-pause-ring
attempt. If this time is exceeded, the current ring-pause-ring
attempt will be canceled.
Setting the Max Time Between Ring-Pause-Ring
Calls:
Once the item number has been entered, specify the maximum
time (7–60). Press
ƒ
to apply the new setting.
Cancel Ring Pause Ring After XX Rings
17053
(Phone Access)
(Default = 3 rings) Specify the number or rings at which ring-
pause-ring is aborted. For example, if this setting is set at 3, then
(during the first call)
at 3 rings, ring-pause-ring will be aborted.
Setting Cancel Ring Pause Ring After XX Rings:
Once the item number has been entered, specify the maximum
number of rings (2–10). Press
ƒ
to apply the new setting.
Enable Remote Phone Override
17089
(Phone Access)
(Default = on) If on, users may cut off a local phone call or
answering machine to access the panel from a remote phone.
Note
For residential use only.
To turn Enable Remote Phone Override On/Off:
Once the item number has been entered, enter
1
to turn this
setting on, or
0
to turn it off. Press
ƒ
to apply the new setting.
Allow Remote Phone Zone Test
17098
(Phone Access)
(Default = on) If on, users may perform zone tests from remote
phones.
To turn Allow Remote Phone Zone Test On/Off:
Once the item number has been entered, enter
1
to turn this
setting on, or
0
to turn it off. Press
ƒ
to apply the new setting.