background image

– 8 –

Control  Features

OPTIONS

HELP

POWER

TEMP

BACK

CLEAR

OFF

START
PAUSE

TUR

N TO SELECT

PRESS TO ENTER

FAN

MSG

REM

MUTE

TIMER

TIMER

FAVORITE

RECIPES

MICROWAVE

REHEAT

EXPRESS

DEFROST

COOK

OVEN

WARM
PROOF

BAKE

BROIL

CUSTOM

SPEED COOK

SPEED

COOK

   LOCK/UNLOCK
HOLD 5 SECONDS 

With your Advantium oven, you can cook with high-intensity halogen lights, ceramic heaters and convection heating
element, and/or conventional microwave energy.

SPEEDCOOK/Repeat Last

Press this pad to access the pre-set
speedcook menu. Press and hold for 
3 seconds to repeat the last cooking
selection.

BAKE/BROIL

Press this pad to bake, broil or toast.

CUSTOM SPEEDCOOK

Press this pad to set your own 
speedcook program.

WARM/PROOF

Select WARM to keep hot, cooked
foods at serving temperature.
Select PROOF to set for a warm
environment useful for rising 
yeast-leavened products.

COOK (Microwave)

Press this pad to microwave food that
is not in the FAVORITE RECIPES
section.

EXPRESS (Microwave)

Press for 30 seconds of microwave
cooking time. Each time the pad 
is pressed adds an additional 30
seconds to the remaining cooking
time. The oven starts immediately.

DEFROST (Microwave)

Press this pad to defrost, soften or
melt frozen foods.

REHEAT (Microwave)

Press this pad to reheat servings of
previously cooked foods or a plate of
leftovers.

FAVORITE RECIPES

Press this pad to add, edit (change)
or remove a recipe from the memory.

TIMER

Press this pad to set the minute
timer.

Display

Shows and instructs the use of all
features on the oven. 

SELECTOR DIAL

–Turn to select, Press

to enter

First turn, then press the dial

to make option, food power level or
temperature selections. Also use the
dial to increase (turn clockwise) or
decrease (turn counterclockwise)
cooking times.

START/PAUSE

Press this pad to start or pause any
cooking function.

CLEAR/OFF

Press this pad to cancel 

ALL

oven

programs except the clock and timer.

BACK

Press this pad to step back one or 
more levels in the program process, 
such as when entering custom
recipes.

HELP

Press this pad to find out more about
your oven’s features.

POWER/TEMP

During cooking, press this pad 
and turn/press the selector dial 
to change the microwave power 
level, the convection bake
temperature or the speedcook
temperature by adjusting the upper
and lower lamp and heater settings.

OPTIONS

Press this pad to set the 

Clock

and access the 

Beeper Volume, Clock

Display ON/OFF, Display Scroll Speed,
Delay Start 

and

Reminder

features.

(

Continued Next Page

)

Содержание Advantium 120















































Отзывы: