Appendix B: Login Administration
Definium AMX 700 X-Ray System
5161515-1EN
Rev. 6 (10 February 2008)
B-9
Operator Manual
© 2008 General Electric Company. All rights reserved.
1. Click a user name to select it.
2. Click [CHANGE PASSWORD].
The Password and Change Password text boxes appear.
Figure B-7
Change password
3. Type a password into the New Password field.
NOTE:
The default system does not have pre-configured standards for password format or construction;
however, your facility may have password standards that must be followed. Ask your facility’s
System Administrator about password standards and create passwords that conform to those
standards.
4. Re-type the password into the Confirm Password field.
5. Click [SUBMIT].
Remove Users
1. Click a user name to select it.
NOTE:
You cannot delete protected users.
2. Click [REMOVE GROUP].
A message appears: “Remove User xxx?”
3. Click [REMOVE NOW].
Show Protected Users
There is a class of users identified as protected users. The privileges assigned to these users can only be
modified by a GE Service Engineer.
Select the
Show Protected Users
checkbox to see these users. Protected users and groups are shown
with a violet (light purple) background.
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
