9
Intercom Operation
A two-way intercom is possible between the base and cordless handset(s) without
tying up the telephone line and since the telephone line is not used, you can still receive
incoming calls.
Making an Intercom Call
1. Make sure the phone is
OFF
(not in TALK mode).
. Press the intercom button.
. Use the
5
or
6
buttons to select the desired handset or base.
NOTE: If you only have one handset registered in the system, it is
paged automatically.
4. Press the
PAGE
soft key.
5. The receiving handset or base is paged, a tone is sounded and the following
information shows in the display:
PAGING
HANDSET 2
EXIT
PAGING FROM
HANDSET 1
OK EXIT
Originating Handset/Base
Receiving Handset/Base
When the
OK
soft key or intercom button on the receiving handset or base is pressed, the
page is answered. If the page is not answered after two minutes,
NO ANSWER
shows in
the display of the originating handset or base and the page is cancelled. The unit returns
to standby mode.
REMARQUE : If a personalized name is assigned to the handset during
registration, then that name is displayed instead of handset number.
REMARQUE : To cancel the page, press the EXIT soft key or intercom
key on the originating unit.
Receiving an Intercom Call
When you receive an intercom call, the handset or base beeps. To answer the intercom
call, press the
OK
soft key, the TALK/LINE1/flash1, TALK/LINE/flash button or the
intercom button.
