Chapter 2. Instrument Setup
36
DMS Go Operator’s Manual
2.3.2d Setting the Display Resolution (CONFIG-RESOLUTION)
1.
In the
MAIN
menu, scroll to the
CONFIG
submenu using the joystick (
).
2.
Use the joystick (
) to select the function titled
RESOLUTION
. Display resolution can be set automatically (
AUTO
) to the
thickness you are measuring, to 1/10 (
X.X
) or 1/100 (
X.XX
) in mm and 1/100 (
X.XX
) or 1/1000 (
X.XXX
) in inches.
Note:
In the AUTO selection, the threshold is 10 inch (for inches). The value which is smaller than 10 inch will be shown in X.XXX mode.
Otherwise the value will be shown in X.XX mode.
For mm, the threshold is 100 mm. The value which is smaller than 100 mm will be shown in X.XX mode. Otherwise the value will be
shown in X.X mode.
3.
To change the resolution level, move the joystick (
).
4.
After making your choice, use the joystick (
) to move to another function, or press
HOME
to return to the Main Menu.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
