Chapter 6. Working with Recorded Data
DMS Go Operator’s Manual
121
6.4
Adding a Comment to a Stored Value
Users can add comments to individual values from the prepared File Comment list.
1.
In the Measure mode, with a data file active and the desired data point (which must already contain a thickness measurement) selected,
center-press and briefly hold the joystick.The function key window will now change, so that F4 is
NOTE
.
2.
Press F4 (
NOTE
) The File Comment List window opens on the display screen.
3.
Move the joystick up or down (
) to choose the file comment. Press F2 (
TAG
) to enter the character. Then, move the joystick .
When you have completed adding the comment, press F1 (
EXIT
) to confirm the entry.
The DMS Go will return to Measure mode, and the letter associated with the comment will appear in the “Comments” column next to the
value column.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
