GE Security Simon XT, Краткое руководство по эксплуатации

Страница: 1 / 4

GE
Security
Simon XT Talking Touch Screen
Quick Operation Guide
Description
The Simon XT Talking Touch Screen is a color 3.5 inch LCD screen
with a graphical user interface designed to control the basic
functions of your Simon XT (v1.3 or later) control panel.
You can use the touch screen to obtain the status of your home
(open doors, movement detected, etc.) and to control your security
system:
• Arm the system (doors, windows, and motion sensors).
• Disarm the system.
• Activate a panic alarm to call the central monitoring station in
a nonmedical emergency.
Depending on the system configuration provided by your dealer,
you may also have the following options:
• Turn system controlled lights on or off.
• View and modify home temperature.
• Access limited online reference information (for example,
weather forecasts).
Note: Contact your dealer for configuration and option details.
This document provides basic operation information for your
touch screen and security system. For complete Simon XT system
programming and operation, refer to the Simon XT panel
documentation.
Upon start up
Upon start up, the Calibration screen appears. Use the Calibration
screen to calibrate this touch screen. Touch the + icons in the
corners on the Calibration screen using a soft, fine point.
Home Screen
You can access the Home screen from any display by touching the
close icon. The Home screen will also appear after a period of
inactivity on any screen (unless you set a blank screen as your
default screen saver).
© 2010 GE Security, Inc.
1 of 4
P/N 466-2384 • REV A • ISS 02MAR10
Time
The current time is located at the top center of the Home screen.
The time is automatically updated periodically by the security
system time.
Emergency button
In an emergency, touch and hold the red Emergency button for 5
seconds to send a panic alarm.
Note: If your system is connected to a security monitoring service,
the authorities will be notified. Contact your dealer for details.
If you touch the Emergency button by mistake, you can cancel the
panic alarm by touching the red Alarm button and entering your
code within 30 seconds (typical time limit, contact your dealer for
more information on your system configuration).
Alarms
If an alarm occurs in your security system, an alarm message will
appear at the bottom of the Home screen. The message will
indicate the time the alarm occurred and the sensor that sent the
alarm. For example, the message might be, “10:30a sn x Front
Door”, indicating the front door sensor sent an alarm at 10:30 am.
Home status icons
The four icons across the middle of the screen represent the
status of your home.
Doors. Depicts monitored door status (most typically
external doors). A green check indicates all monitored doors
are closed. A red exclamation point indicates one or more
doors are open.
Windows. Depicts monitored window status. A green check
indicates all monitored windows are closed. A red
exclamation point indicates one or more windows are open.
Motion. Depicts motion detected by the motion sensors in
your home. A green check indicates no recent motion
detected. A red exclamation point indicates recent motion
was detected. A typical use for this feature would be to
have a touch screen in the garage to see if movement is
detected in the home before you enter the home.
Armed (or Disarmed). Indicates the
current state of your security system.
Note: Consult your dealer for a complete list of all monitored
doors and windows in your system.