GE HEALTHCARE MAC 5500, Руководство оператора

Страница: 92 / 188

Editing ECGs
Select Store to save the edited file. This will replace the original file.
Select Cancel or press ‘Esc’ to discard the changes made to the current file.
9. Select Store to save the edited file.
Editing ECG Measurements
Only overreaders can modify ECG measurements. You must enter an overreader's
password and reviewer information before you can edit the measurements. This
prevents unqualified persons from adjusting the ECG reading.
1. Press File Manager .
A list of ECG reports opens.
2. Press Select .
The cursor is displayed on the screen.
3. Highlight the ECG report to edit.
4. Press Edit to open a list of editing options.
5. Select one of the following options:
• ECG Measurements
This allows you to edit resting, pediatric, or vector loop measurements.
• Hi-Res Measurements
This allows you to edit averaged signal measurements.
You are prompted to enter the overreader password.
6. Enter the overreader password and press Return .
One of two things happens, depending on which option was selected:
• If you selected ECG Measurements , the reviewer information fields open.
Enter the reviewer information and press Return to display the ECG
measurements to edit.
• If you select Hi-Res Measurements , the Onset and Offset softkeys are
displayed.
Press the appropriate softkey to display the associated Hi-Res measurements
to edit.
7. Select the measurement(s) to be edited and type the appropriate value.
8. When you are done, press Return .
9. Continue to edit measurements as necessary.
10. When you are done, press Return twice.
The following message is displayed:
Select Store to save the edited file. This will replace the original file.
Select Cancel or press ‘Esc’ to discard the changes made to the current file.
11. Select Store to save the edited file.
92
MAC ® 5500/MAC ® 5500 HD
2046275-016B