GE HEALTHCARE MAC 5500, Руководство оператора

Страница: 135 / 188

System Setup
Analog Outputs (cont'd.)
Field Description
Delay Defines the delay in milliseconds for the TTL Output QRS detector
signal. Enter a value from 0 to 100.
QRS Beep
Determines whether the system beeps for each QRS complex. Select
On to enable the beep.
CT Data Guard
To configure the Clinical Trial Data Guard , log on to the System Setup screen, select
ECG > CT Data Guard Setup , and complete the fields described in the following tables.
NOTE:
These settings pertain only to clinical trial usage of the system.
CT Data Guard — Clinical Trial Setup
Field Description
Enable Clinical Trial
Data Enables the clinical trial features. Select Yes if you will use this
system for clinical trials.
Project Code Enter the code identifying the project. It can be up to 32 characters
long.
Trial ID Enter the ID of the trial. It can be up to 10 characters long.
Investigator ID
Determines whether the investigator's ID must be entered on each
test. The investigator's ID can be up to 16 characters long. Select
Yes to require the investigator's ID.
Visit Number Determines whether the visit number is required on each test. Visit
number can be up to six characters long. Select
Yes to require the
visit number.
Visit Type
Determines whether the visit type is required on each test. Select
Yes to require the visit type.
If you require visit type, you can edit the list of visit types. You can
have up to six types, including the following preconfigured types:
• Unknown
• Scheduled
• Unscheduled
• Repeat
• Early Termination
• Follow Up
2046275-016B
MAC ® 5500/MAC ® 5500 HD
135