GE HEALTHCARE MAC 2000 Скачать руководство пользователя страница 178

Страница: 178 / 226

Maintenance

Adjusting the Tray for Modified Letter Paper (8.433 x 11 inches)

Use the following procedure to adjust the tray for modified letter paper (8.433 x 11
inches).

Press the push button to open the printer door (6) and insert the modified letter
paper.

Turn the device over so the bottom of the device is facing you.

Loosen the screws for the paper tray spacer (4).

Slide the spacer (3) until it presses the paper that is already loaded.

Ensure that the paper spacer (5) is positioned in between the letter and A4
symbol.

Tighten the screws (4) with the spacer (5) at this position.

Loosen the other set of screws for the paper spacer (2).

Move the spacer (1) to the letter symbol.

Tighten the screws (2) with the spacer (1) at this position.

Removing the Paper Pack

Use the following procedure and pictures to remove the pack of paper from the device.

Use the following procedure to remove the paper pack from the printer:

Press the push button on the top of the device to open the printer door (1).

Lift up the pack of paper (2).

Press the pack of paper against the top plate of the paper compartment (3).

Pull the pack of paper out of the device (4).

178

MAC™ 2000

2053535-002K

Содержание MAC 2000


































































































































































































































Результаты поиска

Содержание MAC 2000

Отзывы:

Похожие инструкции для MAC 2000

Бренды по названию

Популярные бренды

GE HEALTHCARE MAC 2000, Руководство оператора

Результаты поиска

Содержание MAC 2000

Отзывы:

Похожие инструкции для MAC 2000

Бренды по названию

Популярные бренды