GE HEALTHCARE CARESCAPE Monitor B450, Техническое руководство

Страница: 221 / 236

Installation check form
A- 1 (4)
2062973-003
APPENDIX A: Installation check form
CARESCAPE Monitor B450
Prior to testing verify all equipment is calibrated via “Cal” labeling and record Cal Due Dates
PASS = Test passed N.A. = Test not applicable FAIL = Test failed
Customer Monitor type B450- S/N
Service record # Software version
Service engineer
Measuring equipment / test gases used
Equipment / tool / gas Manufacturer Model/Type/Part No Serial Number/ID Cal Due Date
Visual inspection
Observed result PASS FAIL
The monitor and the connected peripheral devices are undamaged.
The monitor and the connected peripheral devices are properly mounted
with specified mounting solutions.
The cables between the patient monitor and the connected devices are
intact, properly connected and secured to the right connectors.
The modules are properly connected and locked.
Electrical safety tests
Date of manufacture of the device:
Is there less than 12 months since the device was manufactured?
Yes: Yes: you do not have to perform the electrical safety tests. To continue the
installation check, mark the electrical safety test completion N.A. and
proceed to
Functional check . If available, attach the original electrical safety
test results to this check form.
No: No: continue to perform the electrical safety tests.
Power outlet is correctly wired.
Power cord and plug are undamaged and all conductors are properly connected.
Ground (earth) integrity Observed result Acceptance
criteria
PASS N.A. FAIL
a.) Ground continuity test without power cord
≤
0.1 ohms
with power cord
≤
0.2 ohms