GE Grid Solutions F60, Инструкция по эксплуатации

Страница: 479 / 740

GE Multilin F60 Feeder Protection System 6-25
6 ACTUAL VALUES 6.3 METERING
6
6.3.8 IEC 61580 GOOSE ANALOG VALUES
PATH: ACTUAL VALUES

METERING

IEC 61850 GOOSE ANALOGS
The F60 Feeder Protection System is provided with optional IEC 61850 communications capability. This
feature is specified as a software option at the time of ordering. See the
Order Codes section of chapter 2
for details.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.
6.3.9 WATTMETRIC GROUND FAULT
PATH: ACTUAL VALUES

METERING

WATTMETRIC GROUND FAULT 1(2)
This menu displays the wattmetric zero-sequence directional element operating power values.
6.3.10 PHASOR MEASUREMENT UNIT
PATH: ACTUAL VALUES

METERING

PHASOR MEASUREMENT UNIT

PMU 1
SOURCE THD & HARMONICS BASE = 1%
SOURCE VOLTAGE V
BASE
= maximum nominal primary RMS value of the +IN and –IN inputs
SYNCHROCHECK
(Max Delta Volts)
V
BASE
= maximum primary RMS value of all the sources related to the +IN and –IN inputs

IEC 61850

GOOSE ANALOGS
ANALOG INPUT 1
0.000
MESSAGE
ANALOG INPUT 2
0.000
MESSAGE
ANALOG INPUT 3
0.000
↓
MESSAGE
ANALOG INPUT 32
0.000

WATTMETRIC

GROUND FAULT 1
WATT GND FLT 1:
0.000 W

PMU 1

PMU 1 VA:
0.0000 kV, 0.00°
Range: Va or Vab per VT bank connection
MESSAGE
PMU 1 VB:
0.0000 kV, 0.00°
Range: Va or Vab per VT bank connection
MESSAGE
PMU 1 VC:
0.0000 kV, 0.00°
Range: Va or Vab per VT bank connection
MESSAGE
PMU 1 VX:
0.0000 kV, 0.00°
MESSAGE
PMU 1 V1:
0.0000 kV, 0.00°
Table 6–2: FLEXELEMENT BASE UNITS (Sheet 2 of 2)