manualshive.com logo in svg

GE Grid Solutions F60, Инструкция по эксплуатации

KELCO F60 - комплексное решение для вашего дома. Установите его с помощью руководства по установке. Скачайте бесплатное руководство пользователя прямо сейчас с manualshive.com и наслаждайтесь всеми возможностями этого продукта. Удобный и надежный - KELCO F60 ваш верный помощник.

Поделиться
Скачать
background image

5-154

F60 Feeder Protection System

GE Multilin

5.5 FLEXLOGIC

5 SETTINGS

5

Some operands can be re-named by the user. These are the names of the breakers in the breaker control feature, the ID
(identification) of contact inputs and outputs, the ID of virtual inputs, and the ID of virtual outputs. If the user changes the
default name or ID of any of these operands, the assigned name will appear in the relay list of operands. The default names
are shown in the FlexLogic operands table above.

The characteristics of the logic gates are tabulated below, and the operators available in FlexLogic are listed in the Flex-
Logic operators table.

LED INDICATORS:

User-programmable 

LEDs

LED USER 1

Asserted when user-programmable LED 1 is on

LED USER 2 to 48

The operand above is available for user-programmable LEDs 2 through 48

PASSWORD 

SECURITY

ACCESS LOC SETG OFF

ACCESS LOC SETG ON

ACCESS LOC CMND OFF

ACCESS LOC CMND ON

ACCESS REM SETG OFF

ACCESS REM SETG ON

ACCESS REM CMND OFF

ACCESS REM CMND ON

UNAUTHORIZED ACCESS

Asserted when local setting access is disabled

Asserted when local setting access is enabled

Asserted when local command access is disabled

Asserted when local command access is enabled

Asserted when remote setting access is disabled

Asserted when remote setting access is enabled

Asserted when remote command access is disabled

Asserted when remote command access is enabled

Asserted when a password entry fails while accessing a password protected

level of the F60

REMOTE DEVICES

REMOTE DEVICE 1 On

REMOTE DEVICE 2 On

REMOTE DEVICE 3 On

↓

REMOTE DEVICE 16 On

Flag is set, logic=1

Flag is set, logic=1

Flag is set, logic=1

↓

Flag is set, logic=1

REMOTE DEVICE 1 Off

REMOTE DEVICE 2 Off

REMOTE DEVICE 3 Off

↓

REMOTE DEVICE 16 Off

Flag is set, logic=1

Flag is set, logic=1

Flag is set, logic=1

↓

Flag is set, logic=1

RESETTING

RESET OP

RESET OP (COMMS)

RESET OP (OPERAND)

RESET OP (PUSHBUTTON)

Reset command is operated (set by all three operands below)

Communications source of the reset command

Operand (assigned in the 

INPUTS/OUTPUTS 



 RESETTING

 menu) source

of the reset command

Reset key (pushbutton) source of the reset command

SELF-

DIAGNOSTICS

(See 

Relay Self-

tests 

descriptions in 

Chapter 7: 

Commands and 

Targets)

ANY MAJOR ERROR

ANY MINOR ERROR

ANY SELF-TESTS

BATTERY FAIL

CLOCK UNSYNCHRONIZED

DIRECT DEVICE OFF

DIRECT RING BREAK

EQUIPMENT MISMATCH

FLEXLOGIC ERR TOKEN

IRIG-B FAILURE

LATCHING OUT ERROR

MAINTENANCE ALERT

FIRST ETHERNET FAIL

PROCESS BUS FAILURE

PTP FAILURE

REMOTE DEVICE OFF

RRTD COMM FAIL

SECOND ETHERNET FAIL

THIRD ETHERNET FAIL

SNTP FAILURE

SYSTEM EXCEPTION

TEMP MONITOR

UNIT NOT PROGRAMMED

Any of the major self-test errors generated (major error)

Any of the minor self-test errors generated (minor error)

Any self-test errors generated (generic, any error)

The battery is not functioning. Return power supply module to manufacturer.

Relay is not synchronized to the international time standard

A direct device is configured but not connected

The Direct I/O settings is for a connection that is not in a ring

The configuration of modules does not match the stored order code

A FlexLogic equation is incorrect

"Bad IRIG-B Signal" self-test. See Chapter 7: Commands and Targets.

A difference is detected between the desired and actual latch contact state

A subset of the minor self-test errors generated, see Chapter 7

Link failure detected. See description in 

Chapter 7: Commands and targets.

See description in 

Chapter 7: Commands and targets

"Bad PTP Signal" self-test as described in Chapter 7

One or more GOOSE devices are not responding

See description in 

Chapter 7: Commands and targets

See description in 

Chapter 7: Commands and targets

See description in 

Chapter 7: Commands and targets

SNTP server is not responding

See description in 

Chapter 7: Commands and targets

Monitors ambient temperature and maximum operating temperature

The 

Settings > Product Setup > Installation > Relay Settings

 setting is 

not programmed

TEMPERATURE 

MONITOR

TEMP MONITOR

Asserted while the ambient temperature is greater than the maximum 

operating temperature (80°C)

USER-

PROGRAMMABLE 

PUSHBUTTONS

PUSHBUTTON 1 ON

PUSHBUTTON 1 OFF

ANY PB ON

Pushbutton number 1 is in the “On” position

Pushbutton number 1 is in the “Off” position

Any of twelve pushbuttons is in the “On” position

PUSHBUTTON 2 to 6, 12, or 16 

depending on front panel

Same set of operands as PUSHBUTTON 1

Table 5–18: F60 FLEXLOGIC OPERANDS (Sheet 8 of 8)

OPERAND TYPE

OPERAND SYNTAX

OPERAND DESCRIPTION

Содержание F60





































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F60

Gardigo Vario 90801 Instruction Manual preview
Vario 90801
Бренд: Gardigo Страницы: 24
NEO TOOLS 97-511 Instruction Manual preview
97-511
Бренд: NEO TOOLS Страницы: 12
Haas Way Cover Troubleshooting Manual preview
Way Cover
Бренд: Haas Страницы: 7
OBO Bettermann isCon PR 90 SW Mounting Instructions preview
isCon PR 90 SW
Бренд: OBO Bettermann Страницы: 68
Magnavox 51MP6200D - 51" Projection Hdtv User Manual preview
51MP6200D - 51" Projection Hdtv
Бренд: Magnavox Страницы: 41
Auer Signal mTCR Quick Start Manual preview
mTCR
Бренд: Auer Signal Страницы: 6
UltraLux Qi-Max User Manual preview
Qi-Max
Бренд: UltraLux Страницы: 4
Hitachi 51F710A Operating Manual preview
51F710A
Бренд: Hitachi Страницы: 72
Panasonic NA40 H Series Instruction Manual preview
NA40 H Series
Бренд: Panasonic Страницы: 1
Eaton Crouse-Hinds GFS Series Installation & Maintenance Information preview
Crouse-Hinds GFS Series
Бренд: Eaton Страницы: 2
ABB REL 352 Instruction Manual preview
REL 352
Бренд: ABB Страницы: 163
ABB Relion 670 series Installation And Commissioning Manual preview
Relion 670 series
Бренд: ABB Страницы: 260
Pepperl+Fuchs R3-SP-IBD12 Installation preview
R3-SP-IBD12
Бренд: Pepperl+Fuchs Страницы: 5
Pepperl+Fuchs R-SP-E12 Quick Start Manual preview
R-SP-E12
Бренд: Pepperl+Fuchs Страницы: 5
Pepperl+Fuchs F-JB Series Manual preview
F-JB Series
Бренд: Pepperl+Fuchs Страницы: 37
Centurion 9943640 Manual preview
9943640
Бренд: Centurion Страницы: 31
Centurion Contour Carrier Manual preview
Contour Carrier
Бренд: Centurion Страницы: 50

Бренды по названию

Популярные бренды

Загрузить еще бренды