GE Digital Energy L30, Инструкция по эксплуатации, Страница: 601 / 644

GE Multilin L30 Line Current Differential System D-1
APPENDIX D D.1 IEC 60870-5-104
D
APPENDIX D IEC 60870-5-104 COMMUNICATIONSD.1IEC 60870-5-104 D.1.1 INTEROPERABILITY DOCUMENT
This document is adapted from the IEC 60870-5-104 standard. For ths section the boxes indicate the following:

– used in
standard direction;

– not used;

– cannot be selected in IEC 60870-5-104 standard.
1. SYSTEM OR DEVICE:

System Definition

Controlling Station Definition (Master)

Controlled Station Definition (Slave)
2. NETWORK CONFIGURATION:

Point-to-Point

Multipoint

Multiple Point-to-Point

Multipoint Star
3. PHYSICAL LAYER
Transmission Speed (control direction):
Transmission Speed (monitor direction):
4. LINK LAYER
Unbalanced Interchange
Circuit V.24/V.28 Standard: Unbalanced Interchange
Circuit V.24/V.28 Recommended
if >1200 bits/s: Balanced Interchange Circuit
X.24/X.27:

100 bits/sec.

200 bits/sec.

300 bits/sec.

600 bits/sec.

1200 bits/sec.

2400 bits/sec.

4800 bits/sec.

9600 bits/sec.

2400 bits/sec.

4800 bits/sec.

9600 bits/sec.

19200 bits/sec.

38400 bits/sec.

56000 bits/sec.

64000 bits/sec.
Unbalanced Interchange
Circuit V.24/V.28 Standard: Unbalanced Interchange
Circuit V.24/V.28 Recommended
if >1200 bits/s: Balanced Interchange Circuit
X.24/X.27:
 100 bits/sec.
 200 bits/sec.
 300 bits/sec.
 600 bits/sec.
 1200 bits/sec.
 2400 bits/sec.
 4800 bits/sec.
 9600 bits/sec.
 2400 bits/sec.
 4800 bits/sec.
 9600 bits/sec.
 19200 bits/sec.
 38400 bits/sec.
 56000 bits/sec.
 64000 bits/sec.
Link Transmission Procedure: Address Field of the Link:

Balanced Transmision

Unbalanced Transmission

Not Present (Balanced Transmission Only)

One Octet

Two Octets

Structured

Unstructured
Frame Length (maximum length, number of octets): Not selectable in companion IEC 60870-5-104 standard