manualshive.com logo in svg

GE Digital Energy L30, Инструкция по эксплуатации, Страница: 102 / 644

Поделиться
Скачать
GE Digital Energy L30 Скачать руководство пользователя страница 102

4-6

L30 Line Current Differential System

GE Multilin

4.2 EXTENDED ENERVISTA UR SETUP FEATURES

4 HUMAN INTERFACES

4

The software prompts for a template password. This password must be at least four characters in length.

3.

Enter and re-enter the new password, then click 

OK

 to continue.

The settings file template is now secured with password protection.

When templates are created for online settings, the password is added during the initial template creation step. It
does not need to be added after the template is created.

d) VIEWING THE SETTINGS TEMPLATE

Once all necessary settings are specified for viewing, users are able to view the settings template on the online device or
settings file. There are two ways to specify the settings view with the settings template feature:

•

Display only those settings available for editing

•

Display all settings, with settings not available for editing greyed-out

Use the following procedure to only display settings available for editing:

1.

Select an installed device or a settings file from the tree menu on the left of the EnerVista UR Setup main screen.

2.

Apply the template by selecting the 

Template Mode > View In Template Mode

 option.

3.

Enter the template password then click 

OK

 to apply the template.

Once the template has been applied, users are limited to view and edit the settings specified by the template. The effect of
applying the template to the phase time overcurrent settings is shown below.

Figure 4–4: APPLYING TEMPLATES VIA THE VIEW IN TEMPLATE MODE COMMAND

NOTE

Phase time overcurrent settings window without template applied.

Phase time overcurrent window with template applied via
the

command.

The template specifies that only the

and

settings be available.

Template Mode > View In Template Mode

Pickup

Curve

842858A1.CDR

Содержание L30





































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов