- 10 -
November 12, 2016
Installation Manual for SX-4000 Standalone
Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
2. INSTALLING SX-4000 INTO THE PROJECTOR
2. INSTALLING SX-4000 INTO THE PROJECTOR
Note:
If the projector comes with the GDC IMB pre-installed, the instructions in Section 2 can be skipped.
This section of the manual describes the physical installation of the SX-4000 into the projector. If
the projector does not have the GDC IMB installed, follow the steps below to install SX-4000 into
the projector.
Figure 2 SX-4000 Standalone IMB
®