- 38 -
December 22
nd
, 2022
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK
™
INSTALLATION MANUAL
13. AUTOMATION SETUP
13.5. Automation setup for Christie ACT devices
The SR-1000 supports the Christie ACT automation device. Follow the steps below to configure
a Christie ACT device in the server automation interface.
1. Under the
Automation
tab in the menu, click the
Device
sub-tab.
2. Under the
Device
list on the left, click on the
Create
button
.
3. Select
‘
ChristieACT
’
as the device
Type
. Enter the
Name
of the ChristieACT device and
click
OK
.
4. Enter the
IP Address
of the ChristieACT device.
5. The default setting for
Port
is displayed on the settings for the ChristieACT device. Change
this value if required.
6. Default
Control Cues
will be set up for a new ChristieACT automation device. Control cues
can be added or removed by clicking the
+
or
–
buttons.
7. Click
Save
to save the settings.
Figure 41: Christie device setting
