- 29 -
December 22
nd
, 2022
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK
™
INSTALLATION MANUAL
10. CONTENT INGEST MANAGEMENT SETUP
10. CONTENT INGEST MANAGEMENT SETUP
An ingest source must be configured before content can be transferred to the SR-1000. This
section shows the configuration for content ingest from two different source types. The same
steps can be used to set up content ingest sources using other sources.
10.1. Content Ingest from USB Disk
The following steps describe the content ingestion from an external USB hard drive:
1. Under the
Content
tab in the menu, click the
Source
drop-down and select the
Ingest
option.
2. Under the
Source
list on the left, select
USB Drive
.
3. Select the
USB storage device
and
partition
from the respective drop-downs.
4. Click
OK
to choose content to be ingested from the USB disk.
Figure 29: Content source setting
