9
20b. Choose the printer, and then select users that you wish to be notified
when the printer has a problem (see your NetWare documentation for
more details).
20c. When you have completed your
Notify List
, press Esc until you return to
the
Print Server Information menu
.
When you have made all your changes, you exit PCONSOLE.
21. Press Esc three times to return to the
PCONSOLE
main menu.
22. Press Esc to save changes and exit
PCONSOLE
.
This ends the section of this manual devoted to NetWare 3.12. Now continue with the
section “NEST-specific Setup” on page 11.
NetWare 4.1 instructions
Setting up PCONSOLE
1. Log into the network as
SUPERVISOR
(or equivalent).
2. Start the
PCONSOLE
program (it is located in SYS:PUBLIC).
3. Change to the correct context, and make a note of it. (You will need this
when you use GCC’s WebAdmin utility, discussed in a later section.)
4. Choose
Quick Setup
and press Enter (see figure 3).
5. Enter the
Print Server Name
. Press Enter, then press Insert and type the
name. Make a note of this name; you will need it when you use GCC’s
WebAdmin utility, discussed in a later section.
6. Change the
New Printer
and the
New Print Queue
entries in the same
way.
7. Choose the volume where you will store your print queues.
8. Change the
Banner Type
to
PostScript
or
Text
as appropriate.
9. Choose the
Printer Type
. For your GCC printer this must be
Other/Un-
known
.
10. Press Esc several times to return to the
PCONSOLE
main menu.
11. Press Esc to save changes and exit
PCONSOLE
.
