Ground Means
Cover of Grounded
outlet Box
Metal Screw
Grounding Pin
(A)
(B)
(C)
(D)
Grounding methods
Grounding Pin
ADAPTER
Display panel hibernate mode
Under the status that the electric fireplace is turned on, if there isn't any operation in 12-15
seconds, any numbers or indication light shown on digital display will all disappear. At this
condition, touch any buttons(either those on remote control or control panel), digital display will
show the current environmental temperature.
Other Important Features
Please be aware that when heater stops working, air will continue to blow for several seconds.
This helps protect the internal wiring from overheating. If the temperature inside the electric
fireplace becomes abnormally high, the temperature protection mechanism will activate
automatically and the heater will be shut down. If this happens, the fireplace will not operate. To
remedy this problem, remove the power cord from the power outlet and wait 3-5 minutes for the
heater to cool down or until the temperature protection mechanism deactivates. Then, plug the
power cord back into the power outlet to resume normal operation.
1500 watts/5000 BTU per hour
Grounding Instructions:
This heater is suitable for 120 volts. The cord has a plug as shown in FIGURE A.
An adaptor (not included) as shown in FIGURE C can be used to connect three-blade
grounding-type plugs into two-slot receptacles. The green grounding plug extending from the
adaptor must be connected to a permanent ground such as a properly grounded outlet box. The
adaptor should not be used if a three-slot grounded receptacle is available.
OPERATING INSTRUCTIONS
15
