Page 5 - 23
Explorer 107 Operation and Maintenance Manual
Operations
© GBC Pro - Tech December 1999
INFORMATION
The side slitters can not be raised without
raising the center slitter.
5.7 Rear cut-off blade
Caution should always be exercised when
using the rear cut-off blade.
Sharp blade can cut you!
W A R N I N G
The rear cut-off blade is intended to cut the
web output from the laminator and should not be used
for any other purposes.
Stop the laminator before using the rear
cut-off blade. Moving material can
damage the rear cut-off blade!
CAUTION
Keep hands and fingers away from the
path of the rear cut-off blade.
Sharp blade can cut you!
W A R N I N G
a) Slide the rear cut-off blade fully to one side
of the laminator.
Keep hands and fingers away from the
bottom of the rear cut-off blade.
Sharp blade can cut you!
W A R N I N G
b) Press and hold down the blade engage lever
while pushing to the opposite side of the
laminator.
Blade engage lever
