Page 5 - 14
Explorer 107 Operation and Maintenance Manual
Operations
© GBC Pro - Tech December 1999
j) Carefully set the lateral film adjustment
end of the unwind shaft into its saddle.
Lateral film adjustment end
INFORMATION
Ensure the roll pins are on top. They should
not be in the saddle!
Roll pins
k) From the rear position of the laminator,
center the film on the unwind shaft.
M e a s u r e m e n t
Left core end support
INFORMATION
Use Chart 5.3.1 Film centering chart in
Section 5 Operations for measurements.
Chart 5.3.1 Film centering chart
Common film widths
12 in. ( 30 cm )
17 in. ( 43 cm )
24 in. ( 61 cm )
11 in. ( 28 cm )
38 in. ( 97 cm )
4 in. ( 10 cm )
Film widths
Measurement
18 in. ( 46 cm )
14 in. ( 36 cm )
