Page 3 - 1
Specifications
Orca 80-99 Operation and Maintenance Manual
© GBC Films Group June 2000
ORCA 80-99
SPECIFICATIONS
Description:
Floor-standing laminator with multiple unwind
positions for high productivity heat-activated laminating,
encapsulating, heat transfer and mounting. The
laminator can also be used with pressure-sensitive films
for cold mounting and laminating applications.
Includes:
Outfeed edge slitters for in line trimming of finished
product.
Dimensions:
L - 120", D - 50", H - 66" (L- 3M, D- 1.27M, H-
1.68M)
Weight (uncrated):
2800 pounds (1270 kg)
Laminating Rolls:
86.5" length (220 cm) roll face with thermally
conductive silicone covered with high release silicone
surface, upper and lower rolls internally heated.
Temperature controlled by state of the art infrared
sensors with closed loop digital control systems,
independently adjustable for both top and bottom rolls.
Laminating Opening:
1_” (4.75 cm) maximum opening controlled with dual
air cylinders.
Laminating Material:
Uses heat-activated 0-74” and pressure-sensitive
materials 0 - 80" (0- cm) wide with films on 3" (7.6
cm.) ID core.
Laminating Speeds:
0 to 30 fpm ( 0 to 9 Mpm) with variable speed,
reversible action, START and STOP controlled via the
front instrument-panel switch or with a foot switch.
Unwind - Rewind:
Three unwind positions; three rewind positions
Safety Features:
(1) Photo-eye motor stop, 4 emergency stop buttons
and two kick cables to stop the machine and raise rolls.
Warranty:
One year parts warranty (except silicone roll coverings
and table tops).
Electric:
220 VAC, 50 or 60 Hz, single phase, 60-65 Amps.
Three phase 32 Amps (Europe only).
Compressed Air:
2 CFM @ 100 PSI.
