Gazelle G9710, Руководство пользователя, Страница: 9 / 39

Pocket Thermography Camera User Manual
viii
●
In the first use, charge the device for more than 2.5 hours in the power-off status.
●
The lithium battery voltage is 3.85 V, and the battery capacity is 2100 mAh.
●
The battery is certified by UL2054.
Maintenance
●
If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●
A few device components (e.g., electrolytic capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
●
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
●
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
●
Please notice that the current limit of USB 3.0 PowerShare port may vary with the PC brand,
which is likely to result in incompatibility issue. Therefore,
it’s advised to use regular USB 3.0 or
USB 2.0 port if the USB device fails to be recognized by PC via USB 3.0 PowerShare port.
●
Your camera will periodically perform a self-calibration to optimize image quality and
measurement accuracy. In this process,
the image will pause briefly and you will hear a “click”
as a shutter moves in front of the detector. The self-calibration will be more frequent during
start up or in very cold or hot environments. This is a normal part of operation to ensure
optimum performance for your camera.
Calibration Service
●
We recommend you send the device back for calibration once a year, and please contact the
local dealer for the information on maintenance points.
Using Environment
●
Make sure the running environment meets the requirement of the device. The operating
temperature shall be -10 °C to 50 °C (14 °F to 122 °F), and the operating humidity shall be 95%
or less.
●
This device can only be safely used in the region below 2000 meters above the sea level.
●
Place the device in a dry and well-ventilated environment.
●
DO NOT expose the device to high electromagnetic radiation or dusty environments.
●
DO NOT aim the lens at the sun or any other bright light.
●
When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
●
DO NOT aim the lens at the sun or any other bright light.
●
The device is suitable for indoor and outdoor uses, but do not expose it in wet conditions.
●
The level of protection is IP 54.
●
The pollution degree is 2.
Emergency
●
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.