Mini Anemometers
(Bluetooth Version)
Operating Instruction
1. Introduction
G9407-Log
is a stable, safe, reliable mini
digital
with Bluetooth function
anemometer, widely used in mining, electric, iron and
steel, petrochemical, energy-saving,
manufacturing, exhaust
navigation, fan
ventilation, sporting and many more
This operating manual includes relevant safety information and warnings.
Please read this manual carefully and observe all the cautions strictly.
Warning:
Before using the product, please read the operation safety rules carefully.
2. Out of the Box
Open the packing box and take out the meter. Please check carefully
if any items below are missing or damaged.
1. Blister
1
-------------------------------
2. Operating manual
1
----------------
3. Operation Safety Rules
1.Please check the meter and the accessories before using and beware
of any damage or abnormal phenomenon. If you find the case is
damaged or the LCD shows nothing, or you consider that the meter
could not work properly anymore, please stop using it.
2.Observe the operating instructions while measuring.
3.Do not open the meter at will or change internal wiring to avoid damages
to the mater.
4.When the LCD displays “ ”, replace the battery timely. Remove the
battery if the meter is not used for a long time.
5.Do not store or use the meter in high temperature, high humidity,
flammable, combustible, or strong electromagnetic environment.
6.Please use soft cloth and neutral detergent to clean the case for
maintenance. Do not use grinding agent and solvent to avoid case
corrosion and damaging the meter.
7.This product has passed CE certification
Warning: Based on the principle of magnetic induction wind speed
measurement, the product may be subject to interference under
strong battery radiation condition. Please stay from those conditions
as far as possible.
4. Product Exterior
1. Wind speed sensor/Temperature Sensor
2. Meter case
3. LCD display
4. Function keys
5. Display Interface
Maximum measurement
Average value
Data hold
Low battery
m/s
km/h
ft/min
Knots
Mph
Celsius
Fahrenheit
Temperature value
Wind chill notification
Wind speed value
Beaufort scale
Bluetooth communication symbol indication
6. Key functions and setup
(remark : “short press”means : about 1second continuous press; “long
press” means : about 2 second continuous press
）
1. ON
/
OFF / Bluetooth communication
Short press once to start up , short press again to power off .
Bluetooth communication : Under the state of boosting unit , long press
to enter Bluetooth communication mode, and then long press again to
quit Bluetooth communication mode.
2.UNIT: Unit conversion key
Short press this key and the wind speed value cycles m/s, km/h, ft/min,
knots, and mph. Long press this key and the temperature unit changes
between
℃
and
℉
.
3.MAX/AVG:
Pressing this key can select maximum, average and normal value
measurement; select maximum and the meter will always show the
maximum reading; select average and the meter will always show the
average reading.
4.HOLD/BL
HOLD: Short press this key once to hold the measurement; short press
this key again to exit data hold and continue normal measurement.
BL: Long press this key to turn on backlight; long press this key again
to turn off backlight.
5.Automatic shutdown
No operation 5 minutes after , then shut down the unit automatically
(the default is automatic shutdown mode )
When you want to remove the automatic shutdown function, hold
down the "hold" + " " key to boot. LCD has a "APO OFF" character
prompt, the automatic shutdown function will be removed .
G9407-Log
P/N:11040110****X
G9407-Log
industries.
