GAURA G-WB-001, Инструкция по эксплуатации

Страница: 8 / 16

1
2
3
5
6
7
8
4
13 14
• Pour drinking water into the bottle, press the power switch on and hydrogen water will start
being generated. If the power switch is turned on with an appropriate amount of water in the
bottle, the LED lights turn blue.
• Press the power switch once and hydrogen water will be generated for 5 minutes. The LED
lights turn blue and after 1 second, the lights change to rainbow colors and hydrogen water
generation starts. Once completed, you will hear a buzzer sound and the LED lights will go off.
• Once hydrogen water generation is completed, slide ❷ (Open/Close Button) down to unlock
the cap. Then open the cap and use the product.
• Depending on the quality of water and temperature, hydrogen concentration may not reach
the prescribed concentration level.
* When generating hydrogen water for drinking, use drinkable tap
water, mineral water, filtered water, RO (reverse osmosis)
water.Use chlorine removal cartridge when you use tap water.
* Wash the chlorine removal cartridge every time before use and
wash and dry the cartridge every time after use and before
storing.
* Since water may accumulate in the oxygen discharge tray after
10 or more generations, periodically remove the oxygen
discharge tray cap and dischage the water inside.
* If a buzzer sound goes on during hydrogen generation, it is a
warning that battery is low. In such case, stop hydrogen
generation and charge the product.
Charging: From start to completion
☆
Estimated full charge time: approx. 5 hours
Charge completed
Generating Hydrogen Water
4
5
9
Image of how to attach
chlorine removal cartridge
Attach by twisting clockwise
❶ Charge the product with the USB AC/DC adapter included in the
package. After full charge, the red LED lights will stop flashing and
turn blue.
❷
After charge is completed, make sure to disconnect the USB
AC/DC adapter. Do not generate hydrogen water while charging.
❸ Rinse the bottle with water several times before use.
❹ When generating hydrogen water for drinking, pour drinking water
up to about 90% of the bottle. For the hydrogen gas inhalation,
pour mineral water or refined water up to about 90% of the bottle.
(Check the water line indicated in ❾ on the right)
❺ Make sure the lid of the USB port is firmly closed as an unclosed
lid may cause malfunctions.
When you start charging, the red LED lights in the bottle will start flashing.
When charging is completed, the red LED lights in the bottle stop flashing and will turn blue.
* When the battery runs out, LED lights turn red and the power automatically goes off.
Preparations Before Use
How to Use
3
USB port
How to Charge
Use the product after charging.
1. Open the lid ❻ of the USB port.
2. Plug the USB AC/DC adapter into a household outlet.
3. Insert USB power cable firmly into the USB port of the
main body.
LED lights turn blue
Out of Battery
LED lights turn red and the
power automatically goes off.
Names of Parts 2
Main Body
❶ Cap
❷
Open/Close Button
❸ Bottle
❹ Power Switch
❺
Hydrogen Generator
❻ USB port
❼ Oxygen Discharge Tray
(Bottom part inside the hydrogen generator)
❽ Oxygen Discharge Tray Cap (Bottom of the bottle)
Accessories
Chlorine Removal Cartridge
USB AC/DC Adapter
USB Power Cable
Inhaler Cap
Inhaler Cannula
Instruction Manual
6