CPR SUSIE®
|
User Guide
16 | Initial Setup
2.
A startup screen is shown while the OMNI®
controller detects the simulator's features.
After the startup screen, the OMNI® controller
will automatically proceed to the main screen.
3.6 CONNECTING THE OMNI® CONTROLLER TO THE S306
1.
Connect the controller's communication cable
to the port on the side of the simulator.
WARNING: Do not connect the simulator or OMNI® to a computer, LAN network
or unauthorized diagnostic equipment using the communication cable (Ethernet
cable). Doing so will cause serious damage to the equipment.
Содержание CPR SUSIE S306
Страница 2: ......