CODE BLUE® MULTIPURPOSE |
User Guide
Initial Setup | 11
3.4 LEG ASSEMBLY
1.
To attach the legs, remove the wing nuts,
washer, and springs from the bolts on the hips.
2.
Remove the IM pad from each leg and
slide the lig into the hip joint by inserting
the bolt through the orifice in the leg.
3.
Assemble the fasteners onto the hip bolt in this
order: washer, spring, washer, and wing nut.
4.
Tighten the wing nut until the
spring is compressed slightly.
Содержание CODE BLUE S303
Страница 80: ...CODE BLUE MULTIPURPOSE User Guide 80 Appendix...